DDS-XM100

Section Links

DDS-XM100

DDS-XM100 Tape Solution

The DDS-XM100 tape replacement device is a reliable, modern, plug & play solution which quickly and simply extends the usable life & productivity of aging exchange equipment. It offers full connectivity to SCSI and PERTEC systems and offers a configurable level of internal storage up to 48GB.

Major Features

Supports most major switches, including NEC NEAX 61E, 61M, 61K, 61BR and 61 Sigma, Alcatel E-10, S-12, Ericsson AXE-10, Siemens-EWSD and other such systems

Mode switchable between different tape emulation modes in software

2x 50 pin Pertec 2.54mm IDC connectors; Adaptor for Kennedy edge connector style available

1x 50 pin IDC 2.54mm pre-configured to support Cartridge Tape interface or SCSI

1x RJ45, 10/100MBit Ethernet port with software configurable IP address and gateway

Network software supports remote control of the device, including transfer of files to and from the unit

2x RS232 ports on DB9 connectors, for factory maintenance and for remote control

1GB internal storage with internal RAID functionality for maximum data integrity; optionally, modular storage architecture supports expansion up to 48GB

Full ECC (Error Correction Code) implementation on all stored data corrects 1 bit error in 256 bytes, reducing error rate to very low levels with RAID1 providing additional data security

SD Card for use as external / removable media; optionally can use USB mass storage device

-48V power supply via standard 6 pin connector with Alarm circuit to detect power faults

12V DC power supply via standard DIN plug

240 x 160 colour LCD for on-screen display

High performance 400MHz ARM compatible Marvell XScale CPU with 64MB of RAM

Table or Rack mountable (via optional brackets)

Reliable Linux based OS

Software upgradable in the field

DDS-XM100

The DDS-XM100 has now been superceded by the DDS-XM200, the DDS-XM100 is supported as a legacy product.

The Digital Data Storage Device DDS-XM100 tape replacement device is a reliable, modern, plug & play solution which quickly and simply extends the usable life & productivity of aging exchange equipment. It offers full connectivity to SCSI and PERTEC systems and offers a configurable level of internal storage up to 48GB.

Major Features

Supports most major switches, including NEC NEAX 61E, 61M, 61K, 61BR and 61 Sigma, Alcatel E-10, S-12, Ericsson AXE-10, Siemens-EWSD and other such systems
Mode switchable between different tape emulation modes in software
2x 50 pin Pertec 2.54mm IDC connectors; Adaptor for Kennedy edge connector style available
1x 50 pin IDC 2.54mm pre-configured to support Cartridge Tape interface or SCSI
1x RJ45, 10/100MBit Ethernet port with software configurable IP address and gateway
Network software supports remote control of the device, including transfer of files to and from the unit
2x RS232 ports on DB9 connectors, for factory maintenance and for remote control
1GB internal storage with internal RAID functionality for maximum data integrity; optionally, modular storage architecture supports expansion up to 48GB
Full ECC (Error Correction Code) implementation on all stored data corrects 1 bit error in 256 bytes, reducing error rate to very low levels with RAID1 providing additional data security
SD Card for use as external / removable media; optionally can use USB mass storage device
-48V power supply via standard 6 pin connector with Alarm circuit to detect power faults
12V DC power supply via standard DIN plug
240 x 160 colour LCD for on-screen display
High performance 400MHz ARM compatible Marvell XScale CPU with 64MB of RAM
Table or Rack mountable (via optional brackets)
Reliable Linux based OS
Software upgradable in the field